9W mabone a masoeu a pholileng / a futhumetseng a ka tlas'a metsi

lisebelisoa tsa mabone a tlas'a metsi Kopo:

Letamo la serapa, letamo la lisekoere, hotele, phororo, tšebeliso ea kantle ea metsi ka ntle

Mabone a Tlas'a Metsi - Lipotso Tse Botsoang Hangata (FAQs)
1. Ke litifikeiti life tsa bohlokoa tsa polokeho tseo ke lokelang ho li batla?
IP Rating: E ​​tlameha ho kopana le IP68 (ho qoelisoa ka ho tsoelang pele) kapa IP69K (ho hloekisa ka khatello e phahameng).
Polokeho ea Motlakase: Tšebeliso ea ka tlas'a metsi e tlameha ho lumellana le UL676 (US) / EN 60598-2-18 (EU).
Tumellano ea Voltage: 12V/24V mefuta e lokela ho netefatsoa ka SELV/PELV.
Tšireletseho ea Lintho: Ho kopana le metsi a matamo ho tlameha ho lumellana le litekanyetso tsa NSF/ANSI 50.

2. Hangata mabone a ka tlas'a metsi a nka nako e kae? Indicator Lifetime Replacement Indicator
Leseli la LED | Lihora tse 50,000-100,000 | Lumen Output <70% ea Ea mantlha
Litiiso / Li-Gaskets: Lilemo tse 5-7: Ho thatafala ho Bonahalang / Ho phunyeha
Bolulo: 15-25 lilemo: Corrosion Penetration> 0.5 mm
Lense ea Optical: Lilemo tse 10+: Li-Scratches tse Bonahalang / Fog

3. Na Nka Fetola Lisebelisoa tsa Ka tsa Khale tsa Halogen ka li-LED?
Ho joalo, empa ka kopo nahana:
Tšebelisano 'meleng: Tiisa litekanyo tsa niche (tekanyetso: 400 mm/500 mm/600 mm).
Tšebelisano ea Motlakase: Netefatsa hore transformer e tšehetsa mojaro oa LED (bonyane 20% ea matla a lekantsoeng).
Ts'ebetso ea Optical: Li-LED tse ncha li ka hloka boemo bo fapaneng ba ho hlopha bakeng sa tšireletso e nepahetseng.
Sistimi ea Taolo: Mookameli ea teng a ka 'na a se ke a tšehetsa karolo ea ho fetola mebala.

4. Ho hlokahala tlhokomelo efe? Ka kotara:
Hloekisa lense ka tharollo ea asene (karo-karolelano ea 1:10).
Hlahloba litiiso bakeng sa kholo ea likokoana-hloko.
Lekola bokaholimo bakeng sa liminerale.

Selemo le selemo:
Teko ea khatello ea matlo (0.5 bar, metsotso e 30).
Lekanya khanyetso ea insulation (> 1 MΩ).
Netefatsa torque ea fastener (ka tloaelo 6-8 N·m).

Lilemo tse hlano:
Tlosa li-O-rings tsohle le li-gaskets.
Sebelisa hape mafura a dielectric.
Nchafatsa firmware ea taolo (haeba ho hlokahala).

5. Ke khetha joang pakeng tsa tsamaiso ea 12V le 120V?

Mekhahlelo: 12V / 24V Sistimi
Sistimi ea 120V/240V
Tšireletseho: E loketse matamo a bolulo
E hloka ho kenya setsebi
Litsenyehelo tse tlase tsa ho kenya | Matsete a pele a holimo
Cable e matha ho fihla ho maoto a 50 (ha ho na ho theoha ha motlakase). Ho matha ho feta maoto a 200 ho ka khoneha.
Iketsetse (DIY) ka botsoalle. Ho hlokahala motho ea sebetsang ka motlakase.
Lisebelisoa: Matamo, liliba, li-spa | Matamo a khoebo, libaka tsa boikhathollo tsa metsi

6. Ke hobane'ng ha lebone la ka le foqoha / le lutla?
Mabaka a Tloaelehileng:
Thermal Cycling: Ho fetoha ha mocheso ka potlako ho ka baka condensation ka hare.
Tšenyo ea Tiiso: Tšenyo ea UV kapa ho kenya ts'ebetso e sa lokelang.
Ho se leka-lekane ha Khatello: Valve ea ho lekana ha khatello e haellang.
Tšenyo 'Meleng: Tšusumetso e nang le lisebelisoa tsa ho hloekisa letamo.

Litharollo:
1. Bakeng sa Condensation: Matha sesebelisoa ka matla a 50% bakeng sa lihora tse 24 ho etsa mouoane oa mongobo.
2. Bakeng sa ho Lutla: Kenya sebaka sa O-ring e kholo 'me u sebelise lubricant ea silicone.
3. Bakeng sa Maqhetsoana ka Sebakeng: Sebelisa epoxy ka tlas'a metsi bakeng sa tokiso ea nakoana.

7. Na li-control tse bohlale li ka kenyelletsoa ho lisebelisoa tse teng?

Likhetho tsa ho Kopanya:
Wireless Retrofit Kits: Eketsa seamoheli sa RF/Wi-Fi ho lisebelisoa tsa motlakase o tlase.
Bafetoleli ba Protocol: DMX ho DALI Gateways bakeng sa litsamaiso tsa khoebo.
Smart Relays: Eketsa taolo ea lentsoe ka hub e bohlale ea lapeng.
Puisano ea Mohala oa Motlakase: Sebelisa mohala o teng bakeng sa phetiso ea data.

8. Likhatelo-pele tsa morao-rao tsa theknoloji ke life? Lense ea ho itlhoekisa: TiO2 photocatalytic coating e thibela kholo ea algae.
Tlhokomelo ea esale pele: Li-sensor li lekola botšepehi ba tiiso le ts'ebetso ea mocheso.
Phetoho e matla ea spectrum: E lokisa CCT le CRI ho latela nako ea letsatsi.
Tekolo e kopaneng ea boleng ba metsi: lisensara tsa pH/chlorine tse hahelletsoeng ka har'a sesebelisoa.
Phetisetso ea motlakase e se nang mohala: Ho tjhaja ka mokhoa o hlakileng bakeng sa lisebelisoa tse tlositsoeng.

9. Ke hloka mabone a makae bakeng sa letamo la ka?

Matamo a bolulo:

Nyenyane (<400 sq. ft.): 2-4 fixtures (15-30 watts ka 'ngoe).

Mahareng (400-600 sq. ft.): 4-6 fixtures (30-50 watts ka 'ngoe).

E kholo (> 600 sq. ft.): Lisebelisoa tse 6+ (50-100 watts ka 'ngoe).

Matamo a khoebo:

0.5-1.0 watts ka leoto le leng le le leng.

Eketsa 20% bakeng sa matšeliso a tebileng (> maoto a 6).

10. Na ho na le likhetho tsa eco-friendly? Likarolo tsa Moshoelella:
Li-LED tse se nang mercury tse lumellanang le RoHS
Ntlo ea aluminium e ka sebelisoang hape (95% e ka sebelisoa hape)
Moralo o tlase oa khanya e putsoa o sireletsa tikoloho ea leoatle
E lumellana le lisebelisoa tsa motlakase tsa letsatsi tsa 12V / 24V tsa DC
Mananeo a ho phethola sehlahisoa a fumaneha ho tsoa ho bahlahisi ba ka sehloohong

Tšehetso ea tekheniki e teng
Bakeng sa keletso e tobileng ea kopo kapa tataiso ea ho kenya, buisana le setsebi se tiisitsoeng sa mabone a letamo. Ho-Lighting e fana ka litšebeletso tsa moralo oa mabone bakeng sa merero e tšoanelehang.